Board and Surface Preparation
Leaves, pine needles and twigs are removed from the main surface. Dirt buildup in the seams between boards is cleared out.
Bare feet, crawling toddlers, and pets spend hours on outdoor flooring in this part of the state, making clear surfaces a priority for your household. A full deck washing washes off slippery green algae, mildew spots, tracked-in dirt, pollen films, and rough graying fibers. Submit one simple request describing your setup to connect with a vetted local pro. Deck washing starts at $150, giving your family a washed, comfortable area to play, relax, and host guests without hassle. For Illinois homeowners, professional deck cleaning supports curb appeal and makes an outdoor living space easier to enjoy. Local specialists tailor each washing service to the boards instead of treating every surface the same.
Our full-service surface washing covers every surface from board gaps to handrails in the area.
Leaves, pine needles and twigs are removed from the main surface. Dirt buildup in the seams between boards is cleared out.
Flowers, bushes and grass around the perimeter are pre-soaked with fresh water and covered for safety.
The washing solution is applied and allowed time to dissolve gray wood, fungal growth and green algae. A gentle rinse washes the boards, while stairs, balusters and railings are scrubbed by hand.
A thorough rinse washes the deck, ending with a brief walkthrough alongside you. A measured softwash method releases each contaminant, helps remove algae, and breaks up mildew and algae film, grime, and years of dirt. This approach gives outdoor boards a clean finish without harsh blasting.
You do not have to spend your weekend scrubbing dirty boards or hauling heavy equipment around the area.
Pressure-treated pine, cedar, and redwood are soft woods that easily split if rinsed with excessive force. Dense hardwoods respond best when grayed fibers are softened before washing. The pro adjusts the pressure to clear away built-up growth without gouging the grain.
While engineered boards stay rot-free, airborne dirt and moss cling tightly to the manufactured grooves. Professionals use gentle solutions aligned with manufacturer specifications to remove persistent film without stripping the protective shell.
Ground-level masonry absorbs damp leaf tannins and black fungi over time. Washing extends to your concrete walkways, brick patios, paver paths, and pool deck edges to pull deep dirt out of porous stone. Pool deck cleaning services can address hardscape next to the swimming zone as part of the same project. A careful rinse can clean your pool deck, protect your pool, and improve the walking surface.
Getting your deck washed is simple.
Tell us the surface size, material, and condition. Photos help show the current state.
A local professional reviews the information and sends a quote for your project.
Check the price and schedule a date that works for you.
The professional washes the boards thoroughly. You pay only for the surface-care service itself with no extra fees attached.
Starting at $150, surface washing costs are calculated based on size, layout, and current condition. A simple flat surface costs less to clear than a complex structure with elevated tiers, steep stairs, and dozens of railing balusters. Tough unwanted residue such as thick growth coats, dark fungal growth, stubborn leaf marks, and heavy graying demand longer treatment times. Different materials, including PVC, composite, and natural wood, dictate the necessary washing remedies. Yard access and surface elevation can also impact the required labor. Should you want finish or sealer applied after the wash, that work is priced independently. The price you approve upfront is the price you pay, without extra fees.
Questions about your surface? Call +1 (855) 684-6078 or use the quote form.
Applying fresh sealer or finish over an unwashed surface traps dirt and leads to early peeling. Penetrating oils cannot pass through gray weathered fibers or damp growth layers to bond with solid wood. Beyond finish adhesion, green moss and fungal growth turn steps into hazardous, slick surfaces when wet. These organisms retain moisture against the timber long after storms pass, encouraging rot around joists, nails, and screws. Washing removes the slick organic growth and loose gray wood, keeping your steps safe to walk on while preparing the lumber to absorb new protective finishes evenly.
Wondering why low pressure is essential for washing outdoor surface boards correctly? High pressure held close to soft wood gouges deep lines into the grain, raising fuzzy splinters that ruin the surface. A skilled cleaner relies on a dedicated surface wash to break down leaf marks, moss, and dirt film. A wide spray rinse under low pressure sweeps the residue off the boards. Composite and PVC surfaces are washed following official manufacturer recommendations so the underlying material stays fully intact throughout the process. People comparing pressure washing services with professional pressure washing in Lemont can choose a method suited to the surface.
Even durable composite materials in the area suffer when cold weather lingers. Packed drifts hold wet leaf layers against synthetic planks for months. Clearings with hard shovels cause surface scuffs, while white chemical crystals discolor composite patterns. Trapped liquid freezes and expands inside microscopic gaps. Warmth reveals dark spots and slick growth across the synthetic boards. A low-pressure rinse removes these stubborn, dull winter deposits safely.
Sweeping away pine needles from surface gaps helps water drain off the structure correctly after heavy rains. Leaves from maple and oak trees fall during fall, while spring scatters tiny seed wings across the planks. If wet organic matter remains flat on the surface, dark tannin marks soak into the timber, requiring a dedicated surface washing to lift out those stubborn pigments safely.
Residents in the area planning to put down fresh seal or color need to wash the surface first. Sealer applied over moss or pollen seals those unwanted residue in place and fails to adhere correctly. A specialized brightener restores a balanced background tone across pine, cedar, or hardwood after rinsing. Complete drying is essential before sealer application. You can ask the local cleaner for an additional quote on applying finish or sealer once they examine the condition of the dry wood.
Outdoors in the area, surface surfaces face constant exposure to rain, falling foliage, and shifting daylight. Protect the planks by sweeping off leaves and needles before wet spots form underneath. Clear the narrow gaps between boards so trapped rainwater drains away properly. Shift heavy planters and thick floor mats to prevent moisture from soaking the material. Prune back nearby branches to let sunlight reach damp areas, and hose down pollen before it settles into the surface.
Washing dense wooden balusters, intricate railings, and steep steps by hand takes significant effort, but finding a contractor to handle it is simple. Sending a single request through our platform connects you with a local surface washing pro in the area. You will see a complete quote and can check every detail prior to giving your approval. We never charge extra platform fees or insert unexpected line items, so you pay only for the physical washing. It provides a straightforward way to get your entire structure washed without hassle.
Surface washing pros take requests throughout Cook County, including the areas neighboring the area. Please select the listed town that is nearest to your property. Across Lemont and nearby communities, local professionals provide service close to home.
Get a free estimate for cleaning your deck in Lemont. Send us your deck dimensions, board material, and a few quick photos. You will receive a direct quote from a local pro with no extra fees added.
Deck Installation. Copyright . All rights reserved.
